I hate to admit it but I was doing some work with Solid Edge on my laptop the other day and I couldn’t find the model I needed to modify.
I looked at my hard drive. The area where I store my data was 101GB in size containing 4,806 folders and 37,279 files.
It took me over [...]
Archive for July, 2010
What’s Your Best Tip For Solid Edge
Solid Edge Survey – Have Your Say on the Future
It seems that changes are afoot at Siemens PLM and there is a new drive to improve the way they listen to and interact with their customers. They have recognised that whilst Solid Edge, and the other products in the Velocity portfolio, have a lot of potential there is always a great deal of room [...]
July 2nd, 2010 | Jon Sutcliffe | 0 comments | Continued
Bill many thanks for your thoughts. I agree with you many of the recommendations could apply to other software.
However the ...
Why pick on Solid Ege ST4? You could have used a fill-in-the-blank form for this article. All of your recommendations ...
Thank you for the tutorial, it was very informative. I will be incorporating ST in my future modeling. I looks ...
I have used Solid Edge for 4 years and ST has made it faster to learn and easier to complete ...
Thanks for a great post John!
Roger 
Jon Sutcliffe says that Yes this is possible in Solid Edge too. Simply open the dwg file into Solid Edge ...
I had to replace around 15k drawings with a new template. Thank you to Ingenea for the Border Control application. 
Yes this is possible in Solid Edge too.
Simply open the dwg file into Solid Edge draft
Select the geometry you want ...
Can you bring in a autocad .DWG file into Solid Edge as a sketch for a part?
I can do this ...
thank you very much for preparing a useful tool...