Get the "Synchronous Technology" Report:

Just enter your name and email address below and we'll send you a comprehensive white paper by Dr. Ken Versprille, partner and PLM Research Director at CPDA, for no charge. We'll also keep you updated with the latest news on Synchronous Technology.

The white paper:

• Reviews the history of 3D CAD
• Analyses Synchronous Technology
• Looks at specific examples
• Considers the impact on your business

and it's yours with our compliments...

Invite Your Friends and Colleagues

• If you have found this site useful why not invite your friends and colleagues to visit.
• Invite friends and colleagues here.

Subscribe to this Blog

•  Subscribe to our feed in a reader
• To find out how subscription works

Ask a Question

•  Ask your question here

Recent Comments

• Bill many thanks for your thoughts. I agree with you many of the recommendations could apply to other software. However the ...
  Arthur Sexton | 29Sep11 | More
• Why pick on Solid Ege ST4? You could have used a fill-in-the-blank form for this article. All of your recommendations ...
  Bill Fane | 29Sep11 | More
• Thank you for the tutorial, it was very informative. I will be incorporating ST in my future modeling. I looks ...
  Kurt Sutinen | 1Aug11 | More
• I have used Solid Edge for 4 years and ST has made it faster to learn and easier to complete ...
  Joe | 1Aug11 | More
• Thanks for a great post John! Roger
  roger reid | 22May11 | More
• Jon Sutcliffe says that Yes this is possible in Solid Edge too. Simply open the dwg file into Solid Edge ...
  radon | 26Nov10 | More
• I had to replace around 15k drawings with a new template. Thank you to Ingenea for the Border Control application.
  Sandeep Bangera | 4Aug10 | More
• Yes this is possible in Solid Edge too. Simply open the dwg file into Solid Edge draft Select the geometry you want ...
  Jon Sutcliffe | 17Jun10 | More
• Can you bring in a autocad .DWG file into Solid Edge as a sketch for a part? I can do this ...
  Management Colleges in Hyderabad | 17Jun10 | More
• thank you very much for preparing a useful tool...
  Burak BALALAN | 11Jun10 | More