Other Recent Articles

post thumbnail

Free Solid Edge Training – Part 2

In our last post we pointed you towards some free Solid Edge video training material. This covered some of the basics for using the Synchronous Technology modelling workflows.
Well, we have another video available for you. This one is from a Solid Edge ST Fundamentals training series and covers some of the steps used in the [...]

October 13th, 2009 | Jon Sutcliffe | 0 comments | Continued
post thumbnail

Free Solid Edge Training – Part 1

Things have been a little quiet on SynchronousTechnology.net for the last couple of months, but let me assure you we have been working away very hard behind the scenes on an exciting new project which will be announced very soon. In addition to this we have been readying ourselves for the imminent shipping of Solid [...]

October 7th, 2009 | Jon Sutcliffe | 0 comments | Continued
post thumbnail

User Interface Changes in Solid Edge ST2

There are many great enhancments in Solid Edge ST2, not least the new Synchronous sheet metal capabilities and the new Simulation module. However in this first post for ST2 I wanted to focus on one of the the most important elements that you first encounter as a user of Solid Edge – the User Interface.
When [...]

July 3rd, 2009 | Jon Sutcliffe | 0 comments | Continued
post thumbnail

Solid Edge with Synchronous Technology 2 Announced

What’s better a Generation Two iPod or a Generation Seven iPod? Now I’m fortunate to have both of these devices. When I got my first Generation 2 iPod I thought it was fantastic, but recently after buying the latest Generation Seven version I realised what I’d been missing. I now had colour screen, [...]

May 29th, 2009 | Jon Sutcliffe | 0 comments | Continued
post thumbnail

Surely all 3D CAD systems have Synchronous Technology?

Since being released in 2008 Synchronous Technology has rightly received rave reviews from users, and pundits alike.
It addresses those questions we as users have been constantly striving to answer:

How can we change our design as quickly as we change our mind?
How can we capture ideas as soon as we think them?
How do we [...]

February 25th, 2009 | Arthur Sexton | 0 comments | Continued
post thumbnail

Converting Traditional to Synchronous

We have seen many great examples of Solid Edge with Synchronous Technology in action over the past few months. Most of these examples focus on either geometry that is purely synchronous or has been imported from another 3D Design solution such as SolidWorks or Inventor. Some previous posts which are worthy of a mention include - Imported Data, PMI [...]

December 3rd, 2008 | Jon Sutcliffe | 0 comments | Continued
post thumbnail

Making Synchronous Design Changes in an Assembly

We have seen various posts and examples that demonstrate the benefits that Solid Edge with Synchronous Technology has when it comes to initial geometry creation or making fast flexible design changes. Some of these include:-
Unified 2D & 3D
Steering Wheel
Live Rules
PMI Dimensions
Editing Imported Data
However all of these examples focus on the creation and manipulation of geometry within [...]

October 14th, 2008 | Jon Sutcliffe | 0 comments | Continued
post thumbnail

Training for Solid Edge with Synchronous Technology

As was mentioned in one of our previous posts Solid Edge with Synchronous Technology is now shipping.
Many existing Solid Edge users have now installed and started working with the product. As always the key to success is ensuring you have the appropriate training.
You could start using Synchronous Technology within minutes of installation, but to really [...]

October 1st, 2008 | Arthur Sexton | 1 comment | Continued
post thumbnail

SolidWorks and Synchronous Technology – Part One

If you are a SolidWorks user it is probably one of many tools that you use to perform your job. Others might include design guides and standards, reference books, analysis software and most certainly Google to name just a few.
We all have a “toolbox” containing our favourite tools but if you are like me we [...]

September 30th, 2008 | Arthur Sexton | 0 comments | Continued
post thumbnail

Find Your CAD Parts in Seconds with Solid Edge and PartBrowser

Just recently I have been lucky enough to be exposed to some fantastic new product design technology. Of course we are at the dawn of a brand new and exciting CAD age with the birth of Synchronous Technology. However we have also been involved with a great new graphical search tool called PartBrowser which makes [...]

September 16th, 2008 | Jon Sutcliffe | 0 comments | Continued
Newer Entries • Older Entries