Today is Sunday, February 05th, 2012
We are nearing that time of year again when the latest and greatest, next version of Solid Edge will be unveiled to the public. This gives us chance to start learning about the great new enhancements that will help us design faster and smarter than ever before.
Even though there is no information publicly available just [...]
Get the "Synchronous Technology" Report:
Just enter your name and email address below and we'll send you a comprehensive white paper by Dr. Ken Versprille, partner and PLM Research Director at CPDA, for no charge. We'll also keep you updated with the latest news on Synchronous Technology.
The white paper:
and it's yours with our compliments...
Subscribe to our feed in a reader
Bill many thanks for your thoughts. I agree with you many of the recommendations could apply to other software.
However the ...
Why pick on Solid Ege ST4? You could have used a fill-in-the-blank form for this article. All of your recommendations ...
Thank you for the tutorial, it was very informative. I will be incorporating ST in my future modeling. I looks ...
I have used Solid Edge for 4 years and ST has made it faster to learn and easier to complete ...
Thanks for a great post John!
Roger 
Jon Sutcliffe says that Yes this is possible in Solid Edge too. Simply open the dwg file into Solid Edge ...
I had to replace around 15k drawings with a new template. Thank you to Ingenea for the Border Control application. 
Yes this is possible in Solid Edge too.
Simply open the dwg file into Solid Edge draft
Select the geometry you want ...
Can you bring in a autocad .DWG file into Solid Edge as a sketch for a part?
I can do this ...
thank you very much for preparing a useful tool... 